BSDTG - Y24 W20 A-100 EXTERIOR PRIMER
- MSDS: BSDTG
- Manufacturer: SHERWIN WILLIAMS CO
- Product Name: Y24 W20 A-100 EXTERIOR PRIMER
- National Stock Number: 8010-01-205-6838
Product Identification
Product ID:Y24 W20 A-100 EXTERIOR PRIMER
MSDS Date:09/01/1990
FSC:8010
NIIN:01-205-6838
MSDS Number: BSDTG
Responsible Party
CLEVELAND, OH 44115-1042
US
Emergency Phone: 216-566-2917
Info Phone: 216-566-2902
Cage: 54636
Contractor
Telephone: 800-251-2486/216-566-2242
Cage: 54636
Ingredients
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <5%
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9293
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
HYDROTREATED LIGHT PETROLEUM DISTILLATE
CAS: 64742-47-8
Fraction By Weight: <24%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
NAPHTHA, MEDIUM ALIPHATIC
CAS: 64742-88-7
Fraction By Weight: 24%
SILICA, CRYSTALLINE - CRISTOBALITE
CAS: 14464-46-1
RTECS: VV7325000
Fraction By Weight: <30%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.05 MG/M3 RDUST9293
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: <26%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9293
MICA - SILICATES (< 1% CRYSTALLINE SILICA)
CAS: 12001-26-2
RTECS: VV8760000
Fraction By Weight: <4%
OSHA PEL 20 MPPCF
ACGIH TLV: 3 MG/M3 RDUST; 9293
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 16%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
2.71 LB/GAL
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION MAY CAUSE
RESPIRATORY IRRITATION OR CENTRAL NERVOUS SYSTEM DEPRESSION.
CONTACT MAY IRRITATE SKIN AND EYES. CHRONIC: PROLONGED OR REPEATED
EXPOSURE MAY CAUSE LUNG DAMAGE, CANCER, DAMA GE LIVER, CNS AND
BRAIN.
Explanation of Carcinogenicity:SILICA IS LISTED BY IARC AS A POSSIBLE
CARCINOGEN.
Effects of Overexposure:INHALED: COUGHING, SHORTNESS OF BREATH,
DIZZINESS, HEADACHE, NAUSEA, LOSS OF COORDINATION. SKIN/EYES:
REDNESS, ITCHING, BURNING SENSATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALED: REMOVE TO FRESH AIR. RESTORE BREATHING. GET MEDICAL
ATTENTION. EYES: FLUSH WITH LOTS OF WATER FOR 15 MINUTES, HOLD LIDS
OPEN. SEE DOCTOR. SKIN: REMOVE CONTAMINATED CLOTHES. WASH WITH SOAP
AND WATER. INGESTED: GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>102F,>39C
Lower Limits:0.9%
Upper Limits:6.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR. WATER MAY BE USED TO DISPERSE VAPORS AND COOL
FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DURING EMERGENCY CONDITIONS EXPOSURE TO
DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD.
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
AREA. ABSORB WITH INERT MATERIAL AND PLACE IN A CONTAINER FOR LATER
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM SOURCES OF IGNITION.
KEEP CONTAINER CLOSED WHEN NOT IN USE. TRANSFER ONLY TO APPROVED,
LABELLED CONTAINERS.
Other Precautions:DO NOT TAKE INTERNALLY. KEE OUT OF REACH OF CHILDREN.
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE
CONTENTS CAN BE HARMFUL OR FATAL. PROPERLY BOND AND GROUND
CONTAINERS WHEN TRANS FERRING.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR EMERGENCY OCCURS; USE NIOSH/MSHA APPROVED RESPIRATOR OR SUPPLIED
AIR RESPIRATOR OR SCBA, AS REQUIRED. USE IN ACCORDANCE WITH 29 CFR
1910.134 AND MANU FACTURER'S RECOMMENDATIONS.
Ventilation:LOCAL EXHAUST IS PREFFERRED TO MAINTAIN EXPOSURE BELOW
PEL/TLV.
Protective Gloves:NITRILE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Density:>1 (AIR=1)
Spec Gravity:>0.92 (WATER=1)
Evaporation Rate & Reference:<1 (ETHER=1)
Appearance and Odor:LIQUID WOOD PRIMER
Percent Volatiles by Volume:>32
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. HMIS:
AVOID EXPOSURE TO SOURCES OF IGNITION SUCH AS OPEN FLAME, SPRKS,
ETC.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE
Disposal
Waste Disposal Methods:WASTE MUST BE TESTED FOR IGNITABILITY TO SEE IF
EPA WASTE NUMBER D001 APPLYS (IAW 40 CFR 261). MANUFACTURER
RECOMMENDS INCINERATION AT PERMITTED FACILITY. DISPOSE OF IN
ACCORDANCE WITH LOCAL, STATE AN D FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.